Axial Pressing Tool PZ-1240 for Pex System with Clamping Range 16mm,20mm,25mm,32mm
| Clamping Force |
20KN |
| Stroke |
40mm |
| Clamping range |
16-32mm |
| Connecting/ charge |
320 times |
| Working cycle |
3s-10s |
| Battery voltage |
18V |
| Battery capacity |
3.0 Ah |
| Charging time |
2hours |
| Package |
Plastic case |
| Accessories |
| Dies |
16-20mm, 25-32mm |
| Battery |
2pcs |
| Charger |
1pc |
| Sealing ring of cylinder |
1set |
| Sealing ring safety valve |
1set |
Axial Pressing Tool PZ-1240 for rehau system with clamping range 16mm,20mm,25mm,32mm
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
