Product Description

Axial Pressing Tool PZ-1240 for Pex System with Clamping Range 16mm,20mm,25mm,32mm                                                                          

 

Clamping Force	20KN
Stroke	40mm
Clamping range	16-32mm
Connecting/ charge	320 times
Working cycle	3s-10s
Battery voltage	18V
Battery capacity	3.0 Ah
Charging time	2hours
Package	Plastic case
Accessories
Dies	16-20mm, 25-32mm
Battery	2pcs
Charger	1pc
Sealing ring of cylinder	1set
Sealing ring safety valve	1set

Axial Pressing Tool PZ-1240 for rehau system with clamping range 16mm,20mm,25mm,32mm
 

 Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.

 Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.

 The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.

 The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

 If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.

 One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.

 Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

 A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.

Price Terms︰ EXW

Payment Terms︰ T/T

Lead Time︰ 7 days